How to Unclog a Vacuum Cleaner

clogged vacuum

Unclogging a vacuum cleaner is not as hard as some of you may think. You will be required to follow some simple instructions and techniques to make sure your vacuum continues to perform efficiently. Hair, dirt, dust and other debris can results in clogs that will reduce suction power of your cleaning product considerably. Suction from materials such as upholstery, carpets and other porous surfaces can diminish the efficiency of a vacuum and therefore it is crucial to prevent clothing, clump of hair and other debris from clogging in the suction line. Regardless of what type and model of vacuum cleaner you are using, you will be required to follow simple cleaning tips to access the area that might be blocked by dirt, fur or hair.

Check power cable

Before doing anything else you will need to determine the cause of reduced suction power. Sometimes, it can be a broken power cable that will affect the suction capability of your vacuum. Turn off and unplug the machine to identify any break in the cable.

Identify clogs’ location

If the power cable looks fine then you might need to disassemble your vacuum to access the hair/dirt clog to clear the suction line. Identify the location that has a clog. It is recommended to check parts such as hose, wand, elbow pipe, bag and filter that may have clogs of unwanted material.

Removing clogs

Shake and pat over the garbage container to remove the clog. In some cases you might not be able be able to dispose of the bog by patting over a trashcan. If this is the case then consider getting to the clog manually. This could be a very irritating but it a job that must be done to ensure maximum output from your vacuum. It is recommended to pull out the clog by hand or use another small vacuum cleaner to suck out clogs.

Removing clogs from elbow pipe and hose

Removing clogs from elbow pipe and hose can be especially difficult. You will be required to pour water through it until the clogs are removed. You may also choose to use a clothes hanger to push out the dirt clog. This can be done by straightening the hanger and then wrapping the ends with duct tape. Push the hanger into the hose and the clog will be removed.

Plug in to check suction

Once you are finished getting rid of the clogs, consider reassembling your vacuum. Plug in the power cable and turn on to see if suction power has improved. A good way to avoid clog formation is to clean your vacuum bag on regular basis. The filter bag inside vacuum is designed to trap dust, hair, dirt and other debris and therefore is it vital you empty it every now and then to make sure they is enough space to trap the incoming flow of dust particles.


You can also check the user manual for instruction on how to remove clogs from different parts of a vacuum cleaner.

We will be happy to hear your thoughts

Leave a reply